最近，客户小李来问我们客服小姐姐，说他家的中空玻璃打胶机打胶不饱满，要怎么解决？

　　Recently, customer Xiao Li came to ask our customer service sister, saying that his insulated glass gluing machine is not fully glued. How can we solve this problem?

　　其实我们的中空玻璃打胶机出现这个问题，主要是有以下两种情况导致的！

　　In fact, the problem with our insulated glass gluing machine is mainly caused by the following two situations!

　　一、打胶速度过快

　　1、 The gluing speed is too fast

　　有的客户为了加快自己的生产节奏追赶生产计划，将打胶速度认为调整的过快，导致胶体还没有完全达到合格标准机头就已经移动到下一个位置进行打胶操作了。

　　Some customers, in order to speed up their production pace and catch up with the production plan, consider the gluing speed to be adjusted too fast, resulting in the glue not fully reaching the qualified standard before the machine head moves to the next position for gluing operation.

　　如果我们需要加快打胶的速度调整了打胶机的移动参数的话，那么我们对应的也应该对供胶系统也进行相应的设置，比如这时候我们就需要加大供胶压力，增大打胶机的出胶速度来配合对象的移动速度的增加。

　　If we need to speed up the glue dispensing speed and adjust the movement parameters of the glue dispensing machine, then we should also make corresponding settings for the glue supply system. For example, at this time, we need to increase the glue supply pressure and increase the glue dispensing speed of the glue dispensing machine to match the increase in the object's movement speed.

　　如果我们仅仅是单独的增加了打胶机的移动速度而没有对压力进行调节的话就很有可能出现打胶不饱满的情况发生。

　　If we only increase the movement speed of the glue machine separately without adjusting the pressure, it is very likely that the glue will not be fully applied.

　　二、供胶压力不足

　　2、 Insufficient glue supply pressure

　　这个情况其实在前一种情况的已经进行过描述了，即便你没有对打胶机的移动速度进行调节也出现了打胶不饱满的情况，那么也有可能是供胶压力过小导致的。这时候我们仅仅需要调整供胶压力即可完美的解决这个问题的发生。

　　This situation has actually been described in the previous scenario. Even if you do not adjust the movement speed of the glue machine, there may still be insufficient glue filling, which may also be caused by insufficient glue supply pressure. At this point, we only need to adjust the glue supply pressure to perfectly solve this problem.

　　三、机头感应器损坏

　　3、 The nose sensor is damaged

　　这种情况非常的少见，但是也不排除这种情况的发生。在我们的打胶机机头有一个对铝条深浅进行探测的感应器，如果发现铝条过深或者过浅的时候他会自动的调整移动的移动速度以及供胶压力（自动调整幅度是小范围内的）。如果我们的铝条本身就深浅不一，在加上我们的感应器损坏的坏就会发生这种情况！

　　This situation is very rare, but it cannot be ruled out that it may occur. There is a sensor at the head of our glue machine that detects the depth of the aluminum strip. If it is found that the aluminum strip is too deep or too shallow, it will automatically adjust the movement speed and glue supply pressure (the automatic adjustment range is small). If our aluminum strips themselves have varying depths, coupled with the damage to our sensors, this situation will occur!

　　本文由  双组份打胶机 友情奉献.更多有关的知识请点击  /   真诚的态度.为您提供为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

　　This article is a friendly contribution from a two-component glue machine For more related knowledge, please click / Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.